Masonry Contractor in White Oak, TX - Brick and Stone Work for Rolling, Wooded Lots
Superior Longview Concrete and Masonry is a masonry contractor serving White Oak, TX. We repair brick, mortar, chimneys and foundations, and build retaining walls, walkways, stone veneer and outdoor kitchens for homes across the city.
- Fully licensed and insured.
- Free in-person estimates.
- We respond within 1 business day.
White Oak homes on rolling, wooded ground
As a masonry contractor in Longview, TX, we're a short drive from White Oak, and most of our calls here come from homeowners on the residential streets off US Highway 80. We see a lot of brick houses with brick chimneys, plus newer homes where folks want a stone front, a walkway or a place to cook outside. It's much the same mix we work on back home in Longview and up the road in Gladewater.
White Oak sits in the rolling hills and piney woods of Northeast Texas, so plenty of lots slope and plenty of houses have big pines close by. A slope pushes on anything built into it, and trees bring shade and roots, so I look at the ground and the trees around a wall before I talk about the wall itself.
Masonry services we offer in White Oak
When brick in White Oak shows stair-step cracks or doors start sticking, we find out what the ground underneath is doing before we fix anything.
Older brick chimneys here take years of rain and pine needles, so we rebuild cracked tops and crumbling brick above the roofline before water gets inside.
When mortar on a White Oak brick house turns sandy, we grind out the worn joints and pack in fresh mortar matched to the old color.
Bricks that crack or flake on a shaded wall or under a leaky gutter, we cut out and replace with brick that blends with the rest.
Pavers suit a sloped White Oak driveway because each one can shift a little without cracking, and we set them on a packed base so they stay level.
On rolling lots, a retaining wall holds a slope back so you can use the yard, with drainage behind it so water doesn't push it over.
For older brick homes and chimneys with years of patching on them, we clean, repair and repoint the masonry so it holds up and reads as one wall again.
We build brick and stone fireplaces for White Oak living rooms and patios, laid out to draw well and finished to fit the style of the house.
Stone veneer, a thin layer of real or cast stone, dresses up a plain front or chimney here without the weight of full stone.
Block walls make solid privacy and property walls on the bigger lots in White Oak, and we set them on a poured concrete base so they stay straight.
For additions, shops and crawl spaces, we lay block foundation walls on level footings so the building above has a square, even base to sit on.
Where a White Oak backyard has room, we build outdoor kitchens in brick, stone or block, from the base and counters to the grill surround.
Under pines, roots and shade can heave a walkway and grow moss on it, so we lay paths on a packed base and slope them to shed water.
We build brick garden walls, mailbox columns and property walls to match the brick on your house, with footings sized for the ground they sit on.
Natural stone fits the wooded setting here, and we lay it for walls, steps, columns and borders that look like they belong on the lot.
When only a few joints have cracked or dropped out, pointing fills them with fresh mortar before rain gets behind the brick and loosens it.
Get a free estimate for your White Oak masonry job
Send the form and we'll get back to you within one business day. I'll come out myself to look at the job and give you a free written estimate, with no pressure to book.
(903) 309-1954- Based in
- Longview, TX 75601
- Hours
- Mon–Fri: 6 AM–9 PM, Sat–Sun: 8 AM–10 PM
What we deal with on jobs in White Oak
Inside White Oak city limits, permits come from the building inspector in the city's Building Inspection Department, and the city asks owners to check with City Hall before any work begins to see whether a job needs one. That check sets the schedule, because a job that needs a permit waits for it before we break ground. Any contractor who wants a city permit there also needs an annual city registration, so you can call the City of White Oak about whoever you're hiring and ask that contractor about license and insurance. We're fully licensed and insured.
When your job needs a permit, we do the paperwork with the city, set up the inspections and tell you if anything needs your signature. US Highway 80 runs straight over from Longview, so getting our crew and a load of brick to your house is easy, and the price comes down to the job itself. That means how much material it takes, how much old brick or mortar has to come out first, how much slope a wall has to hold and how close we can get a truck. The schedule turns on the permit, if there is one, and on dry days for laying mortar and pouring footings, the same as on our jobs in Kilgore, and the written estimate I give you after seeing the job puts your own figure on paper.
What wears down masonry on White Oak properties
Water does most of the damage we see here. Shade from tall pines keeps north walls and chimneys damp, needles clog gutters until they spill down the brick, and over the years that wetness turns mortar soft and sandy until joints open and let water behind the brick. We replace the worn mortar and damaged brick, and I'll point out the gutter or downspout that caused it so the repair lasts.
Ground that moves is the other big one. On a sloped lot, soil and water push on foundations and yard walls, and you see it as stair-step cracks, a leaning wall or a gap opening at a window. Filling the crack alone just buys time, so we find out what's moving first and fix that along with the brick.
How a masonry job goes when you call us in White Oak
Here's how it goes from your first call to the final walk-through, so you know who you'll talk to and when you need to be home.
Call or send a message
Call (903) 309-1954 or use the form, tell us what you're seeing, and we'll set a time for me to come out. Photos of the crack or wall help if you have them.
I come out and measure
I come out myself, look for what's causing the problem, take measurements and photos, and give you a written estimate that spells out the work and the price before anything starts. It helps if you're home so I can show you what I'm seeing.
We handle permits and build
If the job needs a city permit, we file it and set up the inspections, and the start date waits until the permit is issued. I work on site alongside our crew, and you don't have to be home every day while we build.
We walk it with you
When the work is done, we clean up the yard and walk the finished job with you before we pack up, so you know what we did and why. Satisfaction guaranteed on every job.
Questions about masonry work in White Oak
Do I need a permit for masonry work in White Oak, TX?
White Oak requires permits for new construction, remodeling and additions, so a new wall, outdoor kitchen or addition can fall under that rule. Repairs like tuckpointing aren't named on the city's list, which is why the city asks owners to check with City Hall before any work begins, and the city's building and permits page lists what it permits. We make that check for you before we set a start date.
Do I need a permit to put in a paver driveway in White Oak?
The driveway approach, the part that meets the street, is on the city's permit list, and the posted fee for it is $65.00. The rest of the driveway on your lot isn't listed on its own, so we check with City Hall before we start and handle whatever permit the job needs.
How much does masonry work cost in White Oak, TX?
Your price comes from the size of the job, the material you pick and how much old work has to come out, and I put it in writing after I see the house. Matching old brick on an older home takes more hunting than new brick, and stone veneer usually costs less than full stone. If the job needs a building permit, the city's posted fee is based on total square footage with a $50.00 minimum.
What building code does White Oak use for home masonry work?
White Oak uses the International Residential Code for one- and two-family homes, and it covers repairs and alterations as well as new building. That means a chimney rebuild, a foundation wall or an addition is checked against that code, and we build to it.
How do I keep a retaining wall from leaning on a sloped yard in White Oak?
The best way is to give the wall a solid footing below ground and a way for water to drain out from behind it. Most leaning walls we see failed because water built up behind them on a slope, so we backfill with gravel and leave openings or a drain for water to get out. A tall wall usually needs more than a short garden wall, and I'll tell you which yours is when I look at the slope.
How long does a masonry repair take in White Oak?
Most of the wait comes before the work starts, on the permit if the job needs one and on getting a stretch of dry days, since fresh mortar shouldn't get soaked while it sets. A few loose joints go a lot faster than rebuilding a chimney or a wall, and I'll tell you what to expect when I write your estimate.
Longview, TX
Start your White Oak masonry project with a call
A loose joint or small crack caught early is usually a smaller repair than the wall it turns into later, so it's worth having me look now.